When storing your cue, store it flat, preferably in a hard cue case. Hard cue cases are always better than soft cue cases, providing greater protection for your stick from extreme temperatures and moisture. Make sure that when you’re storing your cue you don’t need to put any pressure on it.
How should pool cues be stored?
Always break down your pool cue and store it in a proper pool case (or cue rack) after play. A case envelops your pool cue, keeping it free from dents, nicks and scratches. Pool cue cases also keep pressure off of your cue, which prevents warping and denting.
Can pool cues be stored horizontally?
For the sake of another point of view, snooker cues are generally stored horizontally. Our cases are not really meant for standing straight up.
What warps a pool cue?
But what causes a pool cue to warp anyways? There are many reasons why pool cues warp including excessive exposure to heat and cold, moisture absorption, improper storage, poor cue maintenance, and poor quality wood being used in the construction of the cue itself.
What do you do with a new pool cue?
If your tip looks like this (or worse), then it’s time to replace it!
- Step 1: Remove the Old Pool Cue Tip. …
- Step 2: Clean the Pool Cue Ferrule. …
- Step 3: Prepare the Pool Cue Tip. …
- Step 4: Place the Pool Cue Tip on the Ferrule. …
- Step 5: Cut and Sand the Cue Tip to the Ferrule. …
- Step 6: Shape the Pool Cue Tip.
How often should you chalk your cue?
How frequently should you chalk? Answers will vary among players regarding how often you should chalk your cue stick, but a good rule to follow is to chalk every, and if not every other shot. If a shot requires extra spin on the ball, chalking is advised because it will provide additional friction during the impact.
How often should you shape your cue tip?
Your new tip will likely have to be reshaped after a month or so of play. The natural compression the tip endures from striking the cue ball causes it to lose its shape. If you have a good, hard tip, you should only have to reshape it that one time.
How do I stop my pool cue from warping?
Don’t lean your cue up against any surface, such as a wall or the pool table. This can cause the tip of the cue to bend. Don’t leave your cue next to any heat source, such as a radiator or fireplace. Don’t store it in extreme hot or cold—such as a basement or attic or hot car.
Can you fix a warped pool cue?
You can actually fix minor bends in your cue with your own arm strength. With the cue at a 60-degree angle to the floor, place the flat of one hand, palm down, directly on the bend. … The cue will bend easily into shape. Rotate the cue again and repeat, checking and adjusting until you have straightened the cue.
How do I know if my pool cue is straight?
There are a few different ways to check a cue for straightness, but by far the most popular and reliable way to see if your cue is straight is to “sight” the cue. To sight a cue, hold it up at eye level and look down the cue from the butt, as if you were shooting a rifle.
Are screw on cue tips good?
You are probably looking to buy a very beginner cue or found screw tips that made you think are the screw on cue tips good. The short answer to that is No. Screw tips are for usually very low-end house cues.
What pool cue tips do the pros use?
The most common are 12mm, 13mm, and 14mm. But, they also make 11.75mm and 12.5mm tips. 13mm is the most common among players. Again, sizes vary among pro pool players, but 13mm tips are the most common.
How do you maintain a cue stick?
Tips on Protecting Your Investment
- Never leave your cue stick in areas of extreme heat or cold. …
- Do not expose your cue to any moisture.
- Make sure you always have the bumper on the butt end of your cue.
- Never apply any oils to your cue. …
- Never leave your cue unattended unless it is secure.