|Pool Table Light Sizing Chart|
|Pool Table Size||Recommended Light Size|
|3.5′ x 7′ table||3 lights / 35″ to 55″ length|
|4′ x 8′ table||3 to 4 lights / 40″ to 60″ length|
|4.5′ x 9′ table||4 to 5 lights / 60″ to 80″ length|
How large should a pool table light be?
Most 7′ and 8′ pool tables use a light with three shades mounted on a bar approximately 52” in length. Nine-foot tables typically use a 4-shade light about 68” in length. Lights should hang 30” to 33” from the slate bed to the bottom of the shade.
What is the best lighting for a pool table?
CFL bulbs use much less energy and last longer than incandescent bulbs, and are generally recommended by lighting manufacturers for pool tables. While standard CFL bulbs are not dimmable, but you can find dimmable versions on the market, which may be important to create a nice pool playing ambiance.
Do I need a light over my pool table?
Properly hung pool table lights are just as essential as a level table and a good cue. hung too low, they can be accidentally struck and if hung too high the lights will shine directly in a player’s eyes.
Do you need a light above a pool table?
“The bed and rails of the table must receive at least 520 lux (48 footcandles) of light at every point. … If the light fixture above the table is non-movable, the fixture should be no lower than 65 inches [1.65 m] above the bed of the table.
Can you vacuum pool table felt?
Yes, you can absolutely vacuum a pool table. But some types of vacuums and attachments can damage the felt and affect playability. A vacuum with gentle suction and a nonrevolving, soft-bristled brush will ensure cleanliness and long life for your pool table felt.
What is the best color for a pool table?
Many people have asked me, “what’s the best felt color to put on my pool table?” From the point of view of a serious pool or billiards player, green billiard cloth has been the best choice to play on. The reason being, the color green is supposedly the easiest on the players’ eyes.
Where should pool lights be placed?
Place lights at a uniform depth, between 9-12 inches below the waterline, throughout the pool. Possible exceptions would be if the lights need to be placed on a step or bench or extremely deep pools (see Pro Tip). Lights should be positioned 4 inches beneath the waterline.
How far above table should light hang?
Traditionally, more formal dining rooms have lower hanging light fixtures. A general rule of thumb is to hang the fixture 3 feet (36 inches) above your table or 6 feet (72 inches) off the floor.
Can you stand on pool table?
The short answer is no. Standing on a pool table can cause serious damage and result in costly repairs. You should never stand on a pool table unless absolutely necessary and you should only do so with proper precaution and preparation.
How high should a pool table be from the floor?
From floor to playing surface. The standard pool-table height is between 29 1/4 inches (74.3 centimeters) and 31 inches (78.74 centimeters). This measurement represents the distance between the floor and the table bed of the pool table.
How do you center a pool table light?
Use a plumb line to align the center of the table with the ceiling. Mark the ceiling using a pencil at the point where it aligns with the center of the pool table. Measure the length (x) from the center of your lighting system to both sides of its chain.
How do you hang a pool table light from a drop ceiling?
You can get clips that attach to the tracks for drop ceilings, so that you would be able to hang that from it. Otherwise, you are pushing the same wire that holds the tracks, through the drop panel, attached to a joist, so you can hang the light from that.