Best answer: How big should a light over a pool table be?

In short, pool table lights should be hung between 30″ to 42″ inches above the surface of your pool table. Where exactly your light should be hung will be determined by what size table you have and how big your light is.

How big should a pool table light be?

What Size Light Will Fit My Pool Table?

Pool Table Light Sizing Chart
Pool Table Size Recommended Light Size
3.5′ x 7′ table 3 lights / 35″ to 55″ length
4′ x 8′ table 3 to 4 lights / 40″ to 60″ length
4.5′ x 9′ table 4 to 5 lights / 60″ to 80″ length

How low should a light hang over a pool table?

The recommended hanging height for a pool table light is 31″ to 33″ from the top of the pool table playing surface to the bottom of the lamp shade.

Do you need a light above a pool table?

“The bed and rails of the table must receive at least 520 lux (48 footcandles) of light at every point. … If the light fixture above the table is non-movable, the fixture should be no lower than 65 inches [1.65 m] above the bed of the table.

IT IS INTERESTING:  Frequent question: Can I withdraw money from 8 ball pool?

What is the best lighting for a pool table?

CFL bulbs use much less energy and last longer than incandescent bulbs, and are generally recommended by lighting manufacturers for pool tables. While standard CFL bulbs are not dimmable, but you can find dimmable versions on the market, which may be important to create a nice pool playing ambiance.

Can you stand on pool table?

The short answer is no. Standing on a pool table can cause serious damage and result in costly repairs. You should never stand on a pool table unless absolutely necessary and you should only do so with proper precaution and preparation.

How high should a pool table be from the floor?

From floor to playing surface. The standard pool-table height is between 29 1/4 inches (74.3 centimeters) and 31 inches (78.74 centimeters). This measurement represents the distance between the floor and the table bed of the pool table.

How do you center a pool table light?

Measure the length and width of your pool table using a tape measure, find the center, and mark it with tape. Use a plumb line to align the center of the table with the ceiling. Mark the ceiling using a pencil at the point where it aligns with the center of the pool table.

How do you hang a pool table light from a drop ceiling?

You can get clips that attach to the tracks for drop ceilings, so that you would be able to hang that from it. Otherwise, you are pushing the same wire that holds the tracks, through the drop panel, attached to a joist, so you can hang the light from that.

IT IS INTERESTING:  How bright should a pool table light be?

Can you vacuum pool table felt?

Yes, you can absolutely vacuum a pool table. But some types of vacuums and attachments can damage the felt and affect playability. A vacuum with gentle suction and a nonrevolving, soft-bristled brush will ensure cleanliness and long life for your pool table felt.

What is the best color for a pool table?

Many people have asked me, “what’s the best felt color to put on my pool table?” From the point of view of a serious pool or billiards player, green billiard cloth has been the best choice to play on. The reason being, the color green is supposedly the easiest on the players’ eyes.

Should you put a rug under pool table?

It’s recommended that you put an area rug under the table that is big enough for all four legs to be on the rug to keep the table from sliding. … On hardwood or tile, an area rug can both protect your flooring from stray balls as well as prevent any small possibility of your table sliding under heavy pressure.

8 ball