The short answer is no. Standing on a pool table can cause serious damage and result in costly repairs. You should never stand on a pool table unless absolutely necessary and you should only do so with proper precaution and preparation.
Is it okay to stand on top of a pool table?
Despite their size and weight, some pool tables can be incredibly fragile, and we would therefore strongly recommend never standing on a pool table. The key part to understanding why a pool table shouldn’t be stood upon is its slate.
Is it bad to sit on a pool table?
No sitting on the table. Unless a shot absolutely requires it, never sit on the edge of the table. The pool table has been meticulously leveled, ensuring that the ball travels the path you send it on, and excessive leaning on the rail will undo that work over time.
How much weight can a pool table support?
A pool table should be well capable of holding several hundred pounds without damage. The top of most good pool tables is 1.5 to 2″ of thick, heavy slate rock. Won’t bend or deflect with even a large amount of force, including its own weight. A pool table’s slate bed can weight 450 to 750 pounds just by itself.
Can a pool table go upstairs?
The answer is yes. You can install your pool table upstairs. It might be more of a hassle than installing one on the ground floor of your building, but if upstairs is the best place for the table then upstairs is where it should go. Remember that a wooden pool table weighs significantly less than a slate pool table.
How much distance is needed around a pool table?
At the minimum, there should be 5 feet of clear space around the table. This space is enough for comfortably placing and stroking the cue. Therefore, the ideal space for your pool table should be at least 10 feet added on top of the table’s dimensions.
How do you put a light above a pool table?
Measure the same length (x) on both sides of the pencil-marked point of the ceiling and drill holes on a stud. Install metal hooks and screw them in tightly. Attach the chains to the hooks and ensure they hang at the required length. Keep the chain links equal to balance the lighting.
Why do pool balls turn yellow?
Pool balls turn yellow due to exposure to UV light, heat, and air. These elements combine to break down the materials used to construct pool balls, giving them an off-white appearance.
How much should I pay for a used pool table?
Quality used tables range in price from $1,000. to over $100,000 for a true antique.
Is it OK to put a pool table in the garage?
You can absolutely put a pool table in a garage. It’s a great place for one but there are a few factors you need to consider before shopping for a table. These include the slope of the floor, the climate in which you live, the space required, the type of pool table, and the wear-and-tear that will undoubtedly happen.
How heavy is an 8 foot slate pool table?
The standard sizes of pool tables are 7, 8, 9, and oversize 8 feet. A 7-foot slate pool table usually weighs about 700 pounds, while an 8-foot slate pool table typically weighs around 850 pounds. The weight of a 9-foot slate pool table is somewhere around 1,000 pounds.
How fragile is pool table slate?
Although pool table slate is very strong and can withstand pool balls being on it, it is a very fragile material, and a tiny crack or chip can ruin the entire piece of slate (or require a repair). This is why it is important to be extremely cautious when you move a pool table to not damage the slate.
How much does a 1 inch slate pool table weigh?
One piece of one inch slate for an 8 foot pool table is about 170 lbs. One piece of one inch slate for a 9 foot pool table weighs about 230 lbs. An 8 foot single piece slate weighs about 425 lbs.
Are pool tables too heavy for the second floor?
No, pool tables are not too heavy for the second floor of your household. And yes, you can safely relocate your pool table to a higher floor, as long as your house was built to code.
Can a second floor collapse?
The answer is that, absolutely, weight can cause a floor to collapse. … So, if a floor is likely to collapse, it’s most likely to do so in the middle of the room between a pair of joists. For a floor in good condition, one person jumping up and down should not cause a problem.
How many pounds can a second floor hold?
The load capacity of a second floor in a home is regulated at 40 lbs. per square foot. For bedrooms, the capacity is 30 lbs. per square foot.